HIK Vision DS-2CD2732F-I(S)
HIK Vision DS-2CD2732F-I(S) - IP66 Network IR Dome Camera
.png)
Hik DS-2CD2732F-I(S) is an innovative EXIR Bullet Camera for video Surveillance.
Camera :
| Image Sensor: | 1/3" Progressive Scan CMOS |
| Signal System: | PAL/NTSC |
| Min. Illumination: | 0.07Lux @(F1.2,AGC ON) ,0 Lux with IR 0.1Lux @(F1.4,AGC ON), 0 Lux with IR |
| Shutter time: | 1/3 s to 1/100,000 s |
| Slow shutter: | Support |
| Lens: | 2.8 - 12 mm @ F1.4,Angle of view: 91.2°-28.3° |
| Lens Mount: | φ14 |
| Adjustment Range: | Pan:0° - 355°, Tilt: 0° - 75°, Rotation: 0° - 355° |
| Day& Night: | IR cut filter with auto switch |
| Wide Dynamic Range: | Digital WDR |
| Digital noise reduction: | 3D DNR |
Compression Standard :
| Video Compression: | H.264/MJPEG |
| Video bit rate: | 32Kbps~12Mbps |
| Audio Compression: | -S: G.711/G.722.1/G.726/MP2L2 |
| Dual Stream: | Yes |
Image :
| Max. Image Resolution: | 2048×1536 |
| Frame Rate: | 50Hz: 20fps (2048 × 1536), 25fps (1920 × 1080), 25fps (1280 × 720) 60Hz: 20fps (2048 × 1536), 30fps (1920 × 1080), 30fps (1280 × 720) |
| Image Settings: | Saturation, brightness, contrast adjustable through client software or web browser |
| BLC: | Yes, zone configurable |
| ROI: | Support |
Network :
| Network Storage: | NAS (Support NFS,SMB/CIFS) |
| Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Protocols: | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Security: | User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask |
| System Compatibility: | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Interface :
| Communication Interface: | 1 RJ45 10M / 100M Ethernet interface |
| On-board storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button: | Yes |
General
| Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
| Power Supply: | 12 VDC ± 10%, PoE (802.3af) |
| Power Consumption: | Max. 5.5 W |
| Impact Protection: | IEC60068-2-75Eh, 50J; EN50102, IK10 |
| Weather Proof: | IP66 |
| Dimensions: | 299.71 × 86.48 × 85.11(11.8’’ × 3.4’’ × 3.35’’) |
| IR Range: | Up to 30m |
| Weight:: | 1000g |
| Note | * “-S” series support 1-ch audio I/O and 1-ch alarm I/O |