HID EDGE Reader Solo ESR40 83120
HID-EDGE Reader Solo ESR40 83120
The HID EDGE Reader Solo IP Access control Solution puts control and user interface at the door - right inside the reader.
The HID EDGE Reader Solo ESR40 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence to the Door", the flexible HID EDGE Reader Solo ESR40 includes an integrated iCLASS reader. And the HID EDGE Reader Solo ESR40 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.
- Simplicity - Control functions for a single door and HID iCLASS reader in one device with the same footprint as a traditional reader
- Management - Remotely managed over the network via standard web browser
- Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies Established Open Architecture - Built on the HID OPIN™ platform, can be remotely reconfigured to a system reader in a host environment
Specification :
Dimensions : 3.3" W x 4.8" H x 2.3" D (83.8 mm x 121.9 mm x 57.9 mm)
Weight : 14.7 oz (.400 kg)
Card Data Formats : Supports any card data format up to 128 bits
Hardware : 32-bit RISC CPU, 100 MHz processor
Memory : 8 MB onboard Flash memory, 32 MB SDRAM, 256K SRAM
Visual Indicators : Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements : 1 A @ 12-16 VDC maximum
- Recommended : Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
- Alternate : Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
- Relays can be configured to supply power as follows :
- Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
- Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.
Operating Temperature : 32° to 122° F (0° to 50° C)
Operating Humidity : 5% to 95% relative, non-condensing
Communication Ports :
- Ethernet : 10 or 100 Mbps
Certifications: UL 294 Listed Component, CSA 205 for Canada, FCC Class A Verification (FCC and Industry Canada Certification for Reader only), ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand
