HID-EDGE EVO EHR40-K
HID-EDGE EVO EHR40-K Networked Controller / Reader
Enabling cost effective installation and high performance access control functionality, the HID EDGE EVO EHR40-K Controller/Reader and Interface Module package is a single-door access control system with reader and separate discrete door interface. The controller/reader is installed at the door and the Hi-O Interface Module is mounted separately in a secure location.
Additional highlights:- The controller/reader and module are connected using the secure Hi-O bus and the Hi-O module provides interface to four discrete inputs and two outputs.
- An additional HID Hi-O iCLASS reader can be attached to the EHR40-K controller/reader's Hi-O bus for in/out reading.
- The HID EHR40-K will accept either a second Hi-O iCLASS reader using the Hi-O bus or a Wiegand /Clock-and-Data reader through the use of a Wiegand Hi-O interface module.
The integrated HID EDGE EVO EHR40-K Controller / Reader also offers interface to 13.56 MHz compliant credentials, including iCLASS.
Specification :
Model (and Part #):HID EHR40-K (82120CKI0001A)
Mounting Holes : US Single-gang and EU / APAC 60mm
Dimensions -HID EHR40 : 3.3" W x 4.8" H x 1.2" D (83.9 mm x 122.2 mm x 30.5 mm)
Dimensions - EDM-M : 3.3" W x 5.0" H x 1.5" D (84.0 mm x 127.0 mm x 37.0 mm)
Weight -HID EHR40 : 6.3oz (180g)
Weight - EDM-M : 4.9oz (140g)
Operating Temperature : 32° to 122° F (0° to 50° C)
Operating Humidity : 5% to 95% relative, non-condensing
Communication Ports : Ethernet (10/100), Hi-O CANbus
13.56 MHz Card Compatibility : 13.56 MHz iCLASS HID Application, ISO14443A CSN
Warranty : Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
DC Input (MAX) @ PoE : 14.4W (300mA @ 48VDC)
DC Input (MAX) @ AUX +12VDC :18W (1500mA @ 12VDC)
DC Input (MAX) @ AUX +24VDC : 36W (1500mA @ 24VDC)
Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
DC Input @ PoE : 8W
DC Input @ AUX +12VDC :13.1W
DC Input @ AUX +24VDC : 26.6W
Hi-O CANbus Output Voltage, DC Input = PoE : 24VDC
Hi-O CANbus Output Voltage, DC Input = AUX : AUX +VDC