HID-EDGE Reader Solo ES400 83000

HID-EDGE Reader Solo ES400 83000

HID

The HID EDGEPlus IP Access Solution puts control and user interface right at the door.

The HID EDGEPlus Solo ES400 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence at the Door", the flexible HID EDGEPlus Solo ES400 offers a wide choice of card reader compatibility. And the HID EDGEPlus Solo ES400 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

With a separately connected reader, HID EDGEPlus is a perfect solution for migrating existing reader installations to the "edge" of the network. Whether the enterprise is iCLASS, Prox, FlexSmart, FlexPass, MIFARE/DESFire, CRESCENDO?, or Wiegand output reader, HID EDGEPlus delivers Intelligence at the Door.

  • True Flexibility - Provides network connectivity for any existing or new Wiegand or compatible HID Clock and Data readers
  • Management - Remotely managed over the network via standard web browser
  • Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies
  • Established Open Architecture - Built on the HID OPINTM platform, can be remotely reconfigured to a system reader in a host environment

Specification :

Dimensions : 3.3" W x 4.8" H x 1.5" D (83.8 mm x 121.9 mm x 36.3 mm)

Weight : 6.8 oz (.195 kg)

Card Data Formats : Supports any card data format up to 128 bits

Hardware : 32-bit RISC CPU, 100 MHz processor

Memory : 8 MB onboard Flash memory, 32 MB SDRAM, 256K SRAM<

Visual Indicators : Two LEDs indicate power/network activity and device I/O activity.

Power Supply Requirements : 1 A @ 12-16 VDC maximum

  • Recommended : Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
  • Alternate : Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
  • Relays can be configured to supply power as follows:
    • Available Power : The EdgeReader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
    • Note : Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.

Operating Temperature : 32° to 122° F (0° to 50° C)

Operating Humidity : 5% to 95% relative, non-condensing

Communication Ports :

  • Ethernet 10 or 100 Mbps
  • Reader Two LEDs indicate power/network activity and device I/O activity.

Certifications : UL 294 Listed Component for the US, CSA 205 for Canada, FCC Class A Verification, ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand