HID Prox80 5405
HID Prox80 5405 - Access control system
HID Prox80 5405 is an 80 mm (3.15") square reader designed to mount directly to European and Asian size single-gang electrical back boxes.
With a three-piece, weatherproof potted enclosure and long pigtail (2.7 m / 9 ft) design, the HID Prox80 5405 is easily installed and provides up to 14 cm (5.5") of read range.
HID Prox80 5405 is used in biometric access control system, biometric attendance system.
Key Features :
- Unique mounting plate accommodates vertical and horizontal mounting hole patterns (60 mm) and Asian (52 mm) hole spacing.
- The long pigtail (2.7 m or 9 ft) simplifies installation by providing easy cable terminations, and increases reliability by reducing the number of cable joins.
- Multilingual installation manual supports field personnel in the proper installation of the reader.
- Available in a grey or white Classic Series cover design with a Wiegand or Clock-and-Data interface.
- Provides high reliability, consistent read range and low power consumption.
- Features include multicolor LED and internal control or host control of the LED and beeper.
- Mounts directly on metal with minimal impact on the read range performance.
- Can be used with all HID proximity cards and all bit formats.
Typical Maximum Read Range :
- ProxCard® II card - up to 5.5" (14 cm)
- ISOProx® II card - up to 5" (12.5 cm)
- DuoProx® II card - up to 5" (12.5 cm)
- ProxKey® II keyfob - up to 2" (5 cm)
- MicroProx® Tag - up to 2.5" (6.2 cm)
- ProxCard® Plus card - up to 1.5" (3.7 cm)
- Smart ISO/DuoProx® cards - up to 2.5" (6.2 cm)
- Proximity & MIFARE® card - up to 5" (12.5 cm)
*Depending on local installation conditions.
- Dimensions : 3.15" x 3.15" x 0.80" (8.0 x 8.0 x 2.0 cm). Screw slots provided for 52-60mm hole spacing
- Power Supply
- 5-16 VDC
- Linear power supplies are recommended
- Current Requirements
- Average : 30 mA (5 VDC); 20 mA (12 VDC)
- Peak : 110 mA (5 VDC); 115 mA (12 VDC)
- Operating Temperature : -22º to 150º F (-30º to 65º C)
- Operating Humidity : 0-95% relative humidity non-condensing
- Weight : 2.2 oz. (63 gm)
- Cable distance
- Wiegand interface: 500 feet (150 m)
- Clock-and-data interface: 50 feet (15 m)
- Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent.
- Additional conductors may be required for LED or beeper control
- Certifications
- Canada/UL 294 Listed : Access Control System Units
- EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
- Canada/UL 294 Listed
- Canada Certification
- CE Mark
- Australia C-Tick, New Zealand
- Fifteen EU Countries under the R&TTE Directive (EN 300 330 - SRD, and ETS 300 683 - EMC)
Frequently Asked Questions – HID Prox80 5405 Reader
Quick answers to common questions about the HID Prox80 5405 Reader, its specifications, compatibility, and use in access control systems.
- Q. Why is the HID Prox80 5405 better for international installations?
- The Prox80 5405 has a unique mounting plate that accommodates both 60 mm European and 52 mm Asian single-gang back-box hole spacing in vertical and horizontal orientations, making it ideal where standard US-style back boxes are not available.
- Q. Can the HID Prox80 5405 be mounted on metal?
- Yes. The Prox80 5405 mounts directly on metal with minimal impact on the read range, making it suitable for metal door frames, turnstiles and outdoor housings.
- Q. What is the read range of the HID Prox80 5405?
- The Prox80 delivers up to 5.5 inches (14 cm) for ProxCard II, up to 5 inches (12.5 cm) for ISOProx II and DuoProx II, around 2 inches (5 cm) for ProxKey II keyfobs and 2.5 inches (6.2 cm) for MicroProx tags.
- Q. Is the HID Prox80 5405 weatherproof?
- Yes. The reader uses a three-piece, fully potted weatherproof enclosure rated to operate from -22 to 150 F (-30 to 65 C) at 0 to 95 percent relative humidity non-condensing, suitable for outdoor installation.
- Q. What output interface does the Prox80 5405 support?
- The Prox80 5405 is available with either Wiegand or Clock-and-Data interface, making it compatible with virtually all standard access control panels.