The HID EntryProx also features faster programming, enabling end-users to batch load up to 2,000 HID cards or keytags, in any format up to 37 bits, by entering a single keypad command sequence. A Block Delete feature allows for efficient badge administration by deleting a sequential range of cards/keytags from the HID EntryProx by user location.

• Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
• Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation.
• Provides Wiegand protocol interface compatibility with all standard access control systems.
• Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).

Typical Maximum Read Range :

• HID ProxCard II Card - up to 8" (20 cm)
• HID ISOProx II Card - up to 7" (17.5 cm)
• HID DuoProx II Card - up to 7" (17.5 cm)
• HID Smart ISOProx II Card - up to 7" (17.5 cm)
• HID Smart DuoProx II Card - up to 7" (17.5 cm)
• HID HID Proximity & MIFARE card - up to 7" (17.5 cm)
• HID ProxCard Plus Card - up to 3" (7.5 cm)
• HID ProxKey II Keyfob - up to 3" (7.5 cm)
• HID MicroProx Tag - up to 4" (10.2 cm)
• HID ProxPass Active Vehicle Tag - N/A

*Depending on local installation conditions.

• Dimensions : 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
• Power Supply
  • 10-28.5 VDC
  • Linear power supplies are recommended. Reverse voltage protection included.
• Current Requirements
  • Average : 100 mA (12 VDC) Peak: 120 mA (24 VDC)
• Operating Temperature : -22º to 150º F (-30º to 65º C)
• Operating Humidity : 0%-95% relative humidity non-condensing
• Weight : 12 oz. (336 gm)
• Cable distance :Wiegand or Clock and Data interface: 500 feet (152 m) RS-232 interface: 50 feet (15 m) RS-422 interface: 4000 feet (1219 m) Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.
• Certifications : Canada/UL 294 Listed: Access Control System Units FCC Certification, United States Canada Certification CE Mark, Fifteen EU Countries under the R&TTE Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC) IEC60950, ITE CB Scheme Electrical Safety Australia C-Tick Mark, New Zealand EMC, China Taiwan (5355 only)