HID ThinLine II 5395

HID ThinLine II 5395- Access control system

HID Reader, ThinLine II 5395,Access control system

Providing performance and reliability, HID's attractive, unobtrusive HID ThinLine II 5395 proximity card reader is housed in a two-piece, weatherproof secure potted enclosure.

  • The size of most standard U.S. switch plates..
  • Available with Wiegand or Clock-and-Data interface..
  • Base part numbers: 5395 (Wiegand), 5398 (Clock-and-Data)..
  • Potted reader suitable for indoor or outdoor use.
  • 18" (45 cm) wire pigtail standard; consult factory for 9' (2.7 m) pigtail available by special order.
Key Features :
  • TwoEasily installed and maintained with the use of replaceable covers.
  • Available with a Wiegand or Clock-and-Data interface.
  • Provides high reliability, consistent read range and low power consumption.
  • Features include multicolor LED and internal control or host control of the LED and beeper.
  • Mounts directly on metal with minimal impact on the read range performance. Optional kit enables mounting behind glass.
  • Aesthetic design available in two cover designs and four colors to match any décor.
  • Includes multilingual installation manual.

Typical Maximum Read Range :

  • HID ProxCard II Card - up to 5.5" (14 cm)
  • HID ISOProx II Card - up to 5" (12.7 cm)
  • HID DuoProx II Card - up to 5" (12.7 cm)
  • HID Smart ISO/DuoProx Cards - up to 5" (12.7 cm)
  • HID Proximity & MIFARE Card - up to 5" (12.7 cm)
  • HID ProxCard Plus Card - up to 1.5" (3.8 cm)
  • HID ProxKey II Keyfob - up to 2" (5.1 cm)
  • HID Microprox Tag - up to 3" (7.6 cm)

*Depending on local installation conditions.

  • Dimensions : 4.70" x 3.00" x 0.68" (11.9 x 7.6 x 1.7 cm)
  • Power Supply
    • 5-16 VDC
    • Linear power supplies are recommended
  • Operating Temperature : -22º to 150º F (-30º to 65º C)
  • Operating Humidity : 0-95% relative humidity non-condensing
  • Weight : 3.3 oz. (94 gm)
  • Cable distance
    • Wiegand interface: 500 feet (150 m)
    • Clock-and-data interface: 50 feet (15 m)
    • Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent.
    • Additional conductors may be required for LED or beeper control
  • Certifications
    • Canada/UL 294 Listed
    • EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
    • Fifteen EU Countries under the R&TTE Directive (EN300 330 - SRD, and ETS 300 683 - EMC)
    • FCC Certification, United States
    • Canada Certification
    • CE Mark
    • Taiwan, China
    • Australia C-Tick, New Zealand

Frequently Asked Questions

Q1. What is the HID ThinLine II 5395 reader?

The HID ThinLine II 5395 is a slim, attractive proximity card reader housed in a two-piece weatherproof potted enclosure approximately the size of a standard US wall switch plate. It is available in two cover designs and four colors to complement any décor, and is suitable for indoor or outdoor use.

Q2. What proximity card types and read ranges does the HID ThinLine II 5395 support?

The HID ThinLine II 5395 reads ProxCard II up to 5.5" (14 cm), ISOProx II and DuoProx II up to 5" (12.7 cm), HID Proximity & MIFARE cards up to 5" (12.7 cm), MicroProx Tag up to 3" (7.6 cm), and ProxCard Plus up to 1.5" (3.8 cm). Actual ranges may vary by installation conditions.

Q3. Can the HID ThinLine II 5395 be mounted on metal?

Yes. The HID ThinLine II 5395 mounts directly on metal surfaces with minimal impact on read range performance. An optional kit also enables mounting behind glass for installations where a fully concealed reader is required.

Q4. What are the power and interface options for the HID ThinLine II 5395?

The HID ThinLine II 5395 operates on 5–16 VDC and is available with either Wiegand (model 5395, cable distance up to 500 ft) or Clock-and-Data (model 5398, cable distance up to 50 ft) interfaces. A standard 18" wire pigtail is included; a 9-foot pigtail is available by special order.

Q5. What certifications does the HID ThinLine II 5395 carry?

The HID ThinLine II 5395 carries Canada/UL 294, FCC (USA), CE Mark (Europe/R&TTE Directive), Australia C-Tick, New Zealand, Taiwan, and China certifications, ensuring compliant installation across major global markets. It operates from -30°C to +65°C (-22°F to 150°F).