Hik DS-2CD2612F-I(S) is an innovative Vari-focal IR Bullet Camera for video Surveillance.
Image Sensor: | 1/3" Progressive Scan CMOS |
Signal System: | PAL/NTSC |
Min. Illumination: | 0.01 Lux @(F1.2,AGC ON), 0 Lux with IR |
Shutter time: | 1/3s ~ 1/100,000s |
Lens: | 2.8 - 12 mm @ F1.4,Angle of view: 98.4°-30.2° |
Lens Mount: | φ14 |
Day& Night: | IR cut filter with auto switch |
Wide Dynamic Range: | Digital WDR |
Digital noise reduction: | 3D DNR |
Video Compression: | H.264/MJPEG |
Video bit rate: | 32Kbps~12Mbps |
Audio Compression: | -S: G.711/G.722.1/G.726/MP2L2 |
Dual Stream: | Yes |
Max. Image Resolution: | 1280x960 |
Frame Rate: | 50 Hz: 25 fps (1280 × 960), 25 fps (1280 x 720), 25 fps (704 x 576), 25 fps (640 x 480) 60 Hz: 30 fps (1280 × 960), 30 fps (1280 x 720), 30 fps (704 x 576), 30 fps (640 x 480) |
Image Settings: | Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser |
BLC: | Yes, zone configurable |
ROI: | Support |
Network Storage: | NAS (Support NFS,SMB/CIFS) |
Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
Protocols: | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Security: | User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask |
System Compatibility: | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
Communication Interface: | 1 RJ45 10M / 100M Ethernet interface |
On-board storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button: | Yes |
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
Power Supply: | 12 VDC ± 10%, PoE (802.3af) |
Power Consumption: | Max. 5.5 W (Max. 7.5 W with IR cut filter on) |
Weather Proof: | IP66 |
Dimensions: | 95×105×258.6 mm (3.74” × 4.13” × 10.18”) |
IR Range: | Up to 30m |
Weight:: | 1200g |
Note | * “-S” series support 1-ch audio I/O and 1-ch alarm I/O |