HID MiniProx 5365
HID MiniProx 5365 - Access control system
The HID MiniProx proximity card reader's potted electronics and slim, attractive design are ideal for indoor or outdoor mounting.
- Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
- Available with Wiegand or Clock-and-Data interface.
- Potted reader suitable for indoor or outdoor use.
- Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
- used in biometric access control system / biometric attendance system.
- Accepts 5- to 16-volts, meeting most voltage requirements.
- Available with Wiegand or Clock-and-data interface.
- Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
- Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
- Mounts directly onto metal with no change in read range performance.
- Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
Typical Maximum Read Range :
- ProxCard® II Card - up to 5.5" (14 cm)
- ISOProx® II Card - up to 5" (12.7 cm)
- DuoProx® II Card - up to 5" (12.7 cm)
- Smart ISOProx®/DuoProx® cards - up to 5" (12.7 cm)
- Proximity & MIFARE® Card - up to 5" (12.7 cm)
- ProxCard Plus® Card - up to 2" (5.1 cm)
- ProxKey® II Keyfob - up to 2" (5.1 cm)
- MicroProx® Tag - up to 2.5" (6.4 cm)
*Depending on local installation conditions.
- Dimensions : 6.0" x 1.7" x 1.0"(15.2 x 4.3 x 2.54 cm)
- Power Supply
- Standard MiniProx: 5-16 VDC
- Haz. Loc. MiniProx: 5-16 VDC
- Linear power supplies are recommended
- Current Requirements
- Average: 30 mA (5 VDC); 20 mA (12 VDC)
- Peak: 110 mA (5 VDC); 110 mA (12 VDC)
- Operating Temperature : -22° to 150° F (-30° to 65° C)
- Operating Humidity : 0-95% relative humidity non-condensing
- Weight
- With terminal strip: 3.5 oz. (99 gm)
- With pigtail: 3.8 oz. (108 gm)
- Haz. Loc. MiniProx: 3.8 oz. (108 gm)
- Cable distance
- Wiegand interface: 500 feet (150 m)
- Clock-and-data interface: 50 feet (15 m)
- Recommended cable is ALPHA 1295 (22 AWG)
- 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
- Certifications
- Canada/UL 294 Listed: Access Control System Units Canada/UL 1604 Listed (with Haz. Loc. junction box only): Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
- FCC Certification, United States
- Canada Certification
- EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
- Fifteen EU Countries under the R&TTE Directive (EN 300330 - SRD, and ETS 300 683 - EMC)
- CE Mark
- Australia C-Tick
- New Zealand
Frequently Asked Questions
Q1. What is the HID MiniProx 5365 reader?
The HID MiniProx 5365 is a slim, attractive proximity card reader with potted electronics suitable for indoor or outdoor mounting. It supports all major HID proximity credentials and is available with either a pigtail or terminal strip and a choice of Wiegand or Clock-and-Data interface.
Q2. What is the maximum read range of the HID MiniProx 5365?
The HID MiniProx 5365 reads ProxCard II up to 5.5" (14 cm), ISOProx II and DuoProx II up to 5" (12.7 cm), and MicroProx Tag up to 2.5" (6.4 cm). ProxCard Plus and ProxKey II Keyfob read up to 2" (5.1 cm). Actual ranges may vary by installation conditions.
Q3. Can the HID MiniProx 5365 be mounted directly on metal?
Yes. The HID MiniProx 5365 mounts directly onto metal surfaces with no change in read range performance, making it a highly versatile reader for installations where non-ferrous mounting surfaces are not available.
Q4. Is the HID MiniProx 5365 suitable for upgrading from magnetic stripe readers?
Yes. The MiniProx 5365 allows easy upgrade from magstripe to proximity access control with no rewiring or new cable required, enabling organizations to modernize their access control systems cost-effectively.
Q5. Is there a hazardous location version of the HID MiniProx 5365?
Yes. A Hazardous Location version is available, listed under UL 1604, Class I & II, Division 2, and Class III for use in environments with flammable gases, dusts, or fibres. It includes the same features and dimensions as the standard MiniProx with an incorporated junction box rated for hazardous use.