HID ProxPro II 5455
HID ProxPro II 5455 - Access control system
HID ProxPro II proximity used for access control combines performance, reliability, and ease of installation into a two-piece, weatherproof potted enclosure. International users will appreciate the multilingual installation manual, lower voltage requirement and flexible mounting options.
HID ProxPro II proximity is used in biometric access control system , biometric attendance system.
There are lot of access control dealers / biometric attendance dealers are available.
- Ideal for medium-range applications.
- Available with Wiegand or Clock-and-Data interface.
- Optional glass mount kit available for mounting the reader behind glass.
- Potted reader suitable for indoor or outdoor use.
- Available in black, white, gray or beige.
- 18" (45 cm) wire pigtail standard; consult factory for 9' (2.7 m) pigtail available by special order.
- Two-piece reader design allows for easy installation..
- Available with a Wiegand or Clock-and-Data interface.
- Provides high reliability, consistent read range and low power consumption.
- Features include multicolor LED and internal control or host control of the LED and beeper.
- Mounts directly on metal with minimal impact on the read range performance. Optional kit enables mounting behind glass.
- Compare features of the ProxPro II to the original ProxPro reader.
Typical Maximum Read Range :
- HID ProxCard II Card - up to 9" (22 cm)
- HID ISOProx II Card - up to 8" (20 cm)
- HID DuoProx II Card - up to 8" (20 cm)
- HID Smart ISOProx Card - up to 8" (20 cm)
- HID Smart DuoProx Card - up to 8" (20 cm)
- HID Proximity and MIFARE card - up to 8" (20 cm)
- HID ProxCard Plus Card - up to 4" (10 cm)
- HID ProxKey II Keyfob - up to 4" (10 cm)
- vMicroProx Tag - up to 4" (11 cm)
*Depending on local installation conditions.
- Dimensions : 5.00" x 5.00" x 1.00" (12.7 x 12.7 x 2.54 cm)
- Power Supply
- 5-16 VDC
- Linear power supplies are recommended
- Operating Temperature : -22º to 150º F (-30º to 65º C)
- Operating Humidity : 0-95% relative humidity non-condensing
- Weight : 13.6 oz. (385 g)
- Current Requirements : 25 mA at 12 VDC Peak: 125 mA at 12 VDC
- Cable distance
- Wiegand interface: 500 feet (150 m)
- Clock-and-data interface: 50 feet (15 m)
- Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent.
- Additional conductors may be required for LED or beeper control
- Certifications
- Canada/UL 294 Listed
- EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
- Fifteen EU Countries under the R&TTE Directive (EN300 330 - SRD, and ETS 300 683 - EMC)
- FCC Certification, United States
- Canada Certification
- CE Mark
- Taiwan (pending)
- Australia C-Tick (pending)
- New Zealand (pending)
Frequently Asked Questions – HID ProxPro II 5455 Reader
Quick answers to common questions about the HID ProxPro II 5455 Reader, its specifications, compatibility, and use in access control systems.
- Q. How is the HID ProxPro II 5455 different from the original ProxPro 5355?
- The ProxPro II 5455 offers a two-piece design for easier installation, lower power consumption (5-16 VDC vs 10-28.5 VDC on the 5355), a slightly longer read range (up to 9 inches for ProxCard II), and a multilingual installation manual.
- Q. What is the maximum read range of the ProxPro II?
- Typical maximum read range is up to 9 inches (22 cm) for ProxCard II, 8 inches (20 cm) for ISOProx II, DuoProx II and Proximity + MIFARE cards, and around 4 inches (10 cm) for ProxKey II keyfobs and ProxCard Plus.
- Q. Can the HID ProxPro II 5455 be installed outdoors?
- Yes. The 5455 is sealed in a potted enclosure suitable for indoor or outdoor use, with an operating range of -22 to 150 F (-30 to 65 C) at up to 95 percent humidity non-condensing.
- Q. Can the ProxPro II be mounted on metal or behind glass?
- The ProxPro II mounts directly on metal with minimal impact on read range. An optional glass mount kit is also available for mounting behind glass surfaces.
- Q. What output interfaces are available?
- The ProxPro II 5455 is available with either Wiegand or Clock-and-Data (magnetic stripe emulation) interface.