How does the HID ProxPro Keypad 5355 send PIN data to the panel?

Keypad data and card data can either be sent on the same cable (combined Wiegand format) or on a separate cable using a 2-of-7 or 3x4 matrix output, depending on what the access control panel expects.

What is the read range of the ProxPro with Keypad?

The ProxPro with Keypad delivers up to 8 inches (20 cm) for ProxCard II, 7 inches (17.5 cm) for ISOProx II, DuoProx II and Proximity + MIFARE cards, and about 3 inches (7.5 cm) for ProxKey II keyfobs.

Is the HID 5355 with keypad weatherproof?

Yes. The reader is sealed for indoor or outdoor use and rated for -22 to 150 F (-30 to 65 C) at 0-95 percent relative humidity non-condensing.

Can the ProxPro Keypad 5355 be mounted behind glass?

Yes. An optional glass mount kit allows the reader to be installed behind glass surfaces for architectural installations like lobby and conference room doors.

Does the ProxPro Keypad support RS-422?

Yes. The 5355 with keypad supports Wiegand, RS-232 and RS-422 interfaces, with RS-422 cable runs up to 4,000 feet (1,219 m).

HID ProxPro with Keypad 5355 | Proximity Reader with PIN Pad

9028006464
sales@csplsoftware.com sales@securityshells.com

HID ProxPro with Keypad 5355

HID ProxPro with Keypad 5355 - Access control system

HID ProxPoint Plus reader combines multiple configuration options with an attractive, inconspicuous design and economical price. Its secure potted electronics are ideal for both indoor and outdoor applications.

used in biometric access control system,biometric attendance system.

Ideal for medium-range applications.
Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
Sealed for indoor or outdoor use.
Optional glass mount kit available for mounting the reader behind glass.
Available in gray or beige.
Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix.

Key Features :

Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation.
Provides Wiegand protocol interface compatibility with all standard access control systems.
Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).

Typical Maximum Read Range :

HID ProxCard II Card - up to 8" (20 cm)
HID ISOProx II card - up to 7" (17.5 cm)
HID DuoProx II Card - up to 7" (17.5 cm)
HID Smart ISOProx II Cards - up to 7" (17.5 cm)
HID Smart DuoProx II Cards - up to 7" (17.5 cm)
HID Proximity & MIFARE Card - up to 7" (17.5 cm)
HID ProxCard Plus® Card - up to 3" (7.5 cm)
HID ProxKey II Keyfob - up to 3" (7.5 cm)
HID MicroProx Tag - up to 4" (10.4 cm)
HID ProxPass Active Vehicle Tag - N/A

*Depending on local installation conditions.

Dimensions : 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
Power Supply
- 10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
Maximum Current Requirements
- Average : 100 mA (12 VDC)
- Peak : 120 mA (24 VDC)
Operating Temperature : -22º to 150º F (-30º to 65º C)
Operating Humidity : 0-95% relative humidity non-condensing
Weight :12 oz. (336 gm)
Current Requirements : 20mA avg / 75mA peak at 12VDC
Cable distance
- Wiegand or Clock and Data interface: 500 feet (152 m)
- RS-232 interface: 50 feet (15 m)
- RS-422 interface: 4000 feet (1219 m)
- Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
- Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.
Certifications
- Canada/UL 294 Listed: Access Control System Units
- FCC Certification, United States
- Canada Certification
- CE Mark, Fifteen EU Countries under the R&TTE
- Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
- IEC60950, ITE CB Scheme Electrical Safety
- Australia C-Tick Mark, New Zealand EMC, China
- Taiwan (5355 only)

Frequently Asked Questions – HID ProxPro with Keypad 5355

Quick answers to common questions about the HID ProxPro with Keypad 5355, its specifications, compatibility, and use in access control systems.

Q. How does the HID ProxPro Keypad 5355 send PIN data to the panel?: Keypad data and card data can either be sent on the same cable (combined Wiegand format) or on a separate cable using a 2-of-7 or 3x4 matrix output, depending on what the access control panel expects.
Q. What is the read range of the ProxPro with Keypad?: The ProxPro with Keypad delivers up to 8 inches (20 cm) for ProxCard II, 7 inches (17.5 cm) for ISOProx II, DuoProx II and Proximity + MIFARE cards, and about 3 inches (7.5 cm) for ProxKey II keyfobs.
Q. Is the HID 5355 with keypad weatherproof?: Yes. The reader is sealed for indoor or outdoor use and rated for -22 to 150 F (-30 to 65 C) at 0-95 percent relative humidity non-condensing.
Q. Can the ProxPro Keypad 5355 be mounted behind glass?: Yes. An optional glass mount kit allows the reader to be installed behind glass surfaces for architectural installations like lobby and conference room doors.
Q. Does the ProxPro Keypad support RS-422?: Yes. The 5355 with keypad supports Wiegand, RS-232 and RS-422 interfaces, with RS-422 cable runs up to 4,000 feet (1,219 m).